路通悦宝--您身边的高端汽车养护维修专家!
新闻列表

NEWS

服务项目

Services Available

联系我们

CONTACT US

全国服务热线

15508684333

  • 联系:邢女士
  • 手机:15508684333
  • 邮箱:15508684333
  • 网址:http://www.sdjnltqf.com
  • 厂址:山东省济南市全福立交桥东100米路北(工业北路301号)通运汽配城3排15、16号 4排15、16号)
公司新闻 您现在的位置:首页 > 新闻资讯 > 公司新闻 >

汽车维修工作流程大致分为6步

来源:http://www.sdjnltqf.com发布时间:2022-11-26 11:02:52

济南奥迪汽车专修厂家提醒,汽车维修的流程有:1.安全着装;2.车辆保护;3.举升设备的安全操作;4.准备工具和测量仪表;5.拆卸和安装,拆卸和装配作业;6.处理拆下的零件。
Jinan Audi auto repair manufacturer reminds that the auto repair process includes: 1. Dress safely; 2. Vehicle protection; 3. Safe operation of lifting equipment; 4. Prepare tools and measuring instruments; 5. Disassembly and installation, disassembly and assembly; 6. Dispose of the removed parts.
1.安全着装
1. Safety dress
在修车时,要穿干净的工作服,须戴好帽子,穿好安全鞋。
When repairing the car, wear clean work clothes, hats and safety shoes.
2.车辆保护
2. Vehicle protection
修车作业开始前,要准备好散热器格栅罩、翼子板保护罩、座椅护面、地板垫、方向盘罩和变速杆罩等物品。
Before vehicle repair, prepare radiator grille cover, fender protection cover, seat cover, floor mat, steering wheel cover, gear lever cover and other items.
3.举升设备的安全操作
3. Safe operation of lifting equipment
两个或两个以上的人一起工作时,须互相检查对方的安全情况。在发动机运转的情况下工作时,要保证工作间的通风,排出废气。在维修高温、高压、旋转、移动或振动的部件时,穿戴适当的安全设备,并要格外注意不要伤及自己或他人。当顶起车辆时,须使用安全底座来支撑指定区域。提升车辆时,须使用适当的安全设备。
When two or more people work together, they must check each other's safety. When working with the engine running, ensure the ventilation of the workshop and exhaust the waste gas. Wear appropriate safety equipment when repairing high-temperature, high-pressure, rotating, moving or vibrating parts, and pay special attention not to hurt yourself or others. When jacking the vehicle, a safety base must be used to support the designated area. Use appropriate safety equipment when lifting the vehicle.
4.准备工具和测量仪表
4. Prepare tools and measuring instruments
开始作业前,要准备好工具台、工具、专用工具、仪器、消耗品和替换零件。
Before starting the work, prepare the tool table, tools, special tools, instruments, consumables and replacement parts.

济南奥迪汽车专修
5.拆卸和安装,拆卸和装配作业
5. Disassembly and installation, disassembly and assembly
在拆卸零件之前,要检查装配的总体情况,确认其没有变形或损坏。对于复杂的装配体,要做好记录。例如,记录拆下的电气连接、螺栓或软管的总数,并在装配体上做标记,以确保重新装配时各部件都能装到原来的位置。如果有必要,对软管及其配件做临时标记。如有必要,清洁拆下的部件,并在完成检查后将其组装起来。
Before disassembling the parts, check the overall condition of the assembly to ensure that it is not deformed or damaged. For complex assemblies, make records. For example, record the total number of removed electrical connections, bolts or hoses, and mark the assembly body to ensure that all components can be installed in the original position during reassembly. If necessary, temporarily mark the hose and its accessories. If necessary, clean the removed components and assemble them after inspection.
6.处理拆下的零件
6. Dispose of the removed parts
拆下的零件应放在一个单独的盒子里,以避免与新零件混合或弄脏新零件。对于不可重复使用的部件,如衬垫、O型圈和自锁螺母,应按照手册中的说明用新部件替换。
The removed parts shall be placed in a separate box to avoid mixing with new parts or contaminating new parts. Parts that cannot be reused, such as gaskets, O-rings and self-locking nuts, shall be replaced with new parts according to the instructions in the manual.
汽车维修工作者在进行汽车维修检查之前也是要做好安全准备的,这样能够防止在维修过程中收到伤害,以上就是维修工作流程的讲解了,有什么不懂的欢迎来咨询我们http://www.sdjnltqf.com
Automobile maintenance workers should also make safety preparations before carrying out vehicle maintenance and inspection, so as to prevent injuries during maintenance. The above is the explanation of the maintenance workflow. If you don't understand anything, please come to us http://www.sdjnltqf.com !